Product description

How can I make the oil extraction process smoother and more efficient?

Evacuate the oil while it's warm. Warm oil flows more easily, reducing viscosity and making the extraction process faster and more efficient.
What is the recommended temperature range for optimal oil extraction?

The ideal working temperature is between 35°F and 140°F (2°C–60°C). Operating within this range ensures optimal performance of the extractor pump.
Why is the suction getting weaker?

This is a normal conditionand not caused by air leakage or a defect. As the oil level rises, vacuum pressure decreases. Make sure the oil level is below the MAX line. If needed, pump 1–2 times every 30 seconds to restore suction.
Why couldn’t it extract any oil, not even a drop?

When the hose tip is pressed against the bottom of the oil pan, a vacuum blockage can occur. Please pull the hose up about 1/4 inch (6–7 mm), and the oil will begin to flow.
How do I maintain my EWK Oil Extractor?

To maintain peak performance, empty the used oil when the reservoir reaches 70% capacity. Avoid leaving used oil in the extractor. Rinse the reservoir and hoses after each use, then allow all parts to dry completely.

【Mess Free Oil Changes】No more crawling under your car, fighting a drain plug, or balancing a shallow pan. Feed the tube down the dipstick or reservoir opening, pump the handle, and old oil flows straight into the sealed 6.5L tank. In a driveway, shared garage, or apartment parking spot, you can change your own oil without jacks, ramps, or spills.
【Fast Topside Extraction In Minutes】Warm the engine, build vacuum with a few firm pump strokes, and let the extractor quickly draw oil from the sump in just minutes. Because it is fully manual, there is no compressor to set up and no power outlet to find—ideal for quick services between trips, mobile oil changes, or working at the dock where electricity is limited.
【Reach Low Cars Boats And Small Engines】The extra long 102 inch suction tube slides deep into tight sumps where you cannot get to the drain plug. It works on low clearance cars, motorcycles, jet skis, inboard and outboard marine engines, lawnmowers, and generators—anywhere access from below is a pain but you can reach the dipstick or fill opening from above.
【One Extractor For Many Fluids】Use the same tool to pull engine oil, ATF, coolant, and power steering fluid from different vehicles instead of buying a separate pump for each job. The high density heat resistant polyethylene tank and hoses are built for common automotive and marine fluids up to 140°F, so one extractor can follow you from car to boat to yard equipment. Do not use with gasoline or highly volatile or corrosive fluids.
【Portable Tank For Garage Dock And Yard】The compact 6.5L tank is big enough for most passenger car oil changes yet light enough to carry with one hand. A stable base keeps it upright while you pump, and the sealed design makes it easy to transport used oil to a recycling point. Keep it in the garage, on the service cart, or in the boat locker so you always have a clean way to drain fluids when it is time for maintenance.

Intentional design

We make things that work better and last longer. Our products solve real problems with clean design.

Quality first

We obsess over the details and strive to deliver the best products at the best prices, every time.

Customer care

We're always on your side: keeping our loyal customers happy is our top priority and number one goal.

Feature 1

Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.

Feature 2

Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.

At the heart of every product lies a unique story, driven by our passion for quality and innovation. Each item enhances your everyday life and sparks joy.